Sonex AeroConversions Oil Separator Installation Bedienungsanleitung PDF herunterladen

Installing the AeroConversions Oil Separator

(Rev B 032613)

511 Aviation Road Oshkosh, WI 54902

Tel. (920)-231-8297 Fax. (920)-426-8333

www.aeroconversions.com

Other Items You May Need

Review these instructions to determine additional parts you

may need for your particular installation. If you are installing

this on an AeroVee we specically recommend:

__ AeroConversion's ACV-P02-20 Oil Sump Plate, Qty. 1

__ High-Performance -06 Braided Hose, 6 feet (or as req'd.)

Used for oil return line, Jegs part number 361-406006

__ -06AN Hose End Fittings, Qty 3

JEG's part number 555-100001

__ -06AN Hose End Fittings, 90

Swivel end, Qty 1

JEG's part number 799-613163

__ DTL-60000C Series Fuel Line, 5/8" I.D., length as req'd.

Used for Vapor Port Out line and Breather Input line.

Wicks part number MILDTL6000-5/8

__ AN842-10D Hose Elbow, Qty. 1

__ AN912-5D Reducer, Qty. 1

__ MS20822-6D Elbow, Qty. 1

__ Hose clamps as needed.

__ Teon paste (Do NOT use teon tape)

While the AeroConversion's oil separator can be adapted to

nearly any engine/airframe installation, these instructions illus-

trate an installation on an AeroVee engine. AeroConversions

and Sonex Aircraft offer no specic advice for tting an oil

return line to any engine other than those covered in these

instructions.

Breather Input

1/2-14 NPT

Includes Steel Ball

for Inverted Flight

Oil Drain / Return Port

1/2-14 NPT

Vapor Port Out

5/8" O.D. Tube

Oil Separator Features

Mounting the Separator

The oil separator must be mounted in a position that permits

the oil drain port to be above the engine's oil level in normal

ight attitudes. When selecting a location for the oil separator

keep in mind the need for access to the oil drain port if an oil

return line to the engine will not be installed.

AeroConversions

A Product Line of Sonex Aircraft LLC

Mounting Bracket

How It Works

Oil vapor that enters your engine's oil breather is routed to the

separator where it is collected. A steel ball in the breather input

port prevents excessive oil loss during inverted ight.

An oil drain / return port on the bottom of the separator allows

collected oil from the separator to return to the engine via an

oil return hose connected to a low point on your engine's oil

sump, or be collected in the separator and drained.

The vapor port vents vapor out the bottom of the aircraft with-

out excessive oil residue.

Oil Separator Parts

The Oil Separator Assembly (ACV-S03-01) consists of:

ACV-S03-01, Oil Separator

ACV-S03-14, Steel Ball Bearing

1 2 3

Inhaltsverzeichnis

Seite 1 - AeroConversions

Seite 3

Kommentare zu diesen Handbüchern

Keine Kommentare

Sonex AeroConversions Oil Separator Installation Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Sonex AeroConversions Oil Separator Installation herunter. Sonex AeroConversions Oil Separator Installation User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Sonex AeroConversions Oil Separator Installation